•
Square, Triangle,
Sine waves, TTL and CMOS
pulse outputs
• 0.3 Hz to 3 MHz range
• Linear or logarithmic sweep
• Amplitude or frequency
modulation
• Built-in 150 MHz
frequency counter with
6 digit LED display
•
Voltage controlled
frequency (VCF) input
•
Two switchable 20 dB
attenuators
• Signal polarity invert button
•
Va riable duty-cycle
• Va r iable DCV offset
Model FG3C
Function Generator
FG3C Specifications
(at 23 ºC; ≤ 70 % R.H.)
Main
Frequency Range 0.3 Hz to 3 MHz (7 ranges)
Amplitude >10 Vpp (into 50 Ω load)
Impedance 50 Ω ±10 %
Attenuator (knob) -20 dB ± 1 dB
Attenuator (button) -20 dB ± 1 dB
DC Offset <-5 V to >+5 V (into 50 Ω load)
Duty-Cycle Control 80 %:20 %:80 % to 1 MHz; continuously variable
Range Accuracy ±5 %, +1 Hz (@ 3.0 position)
Sine Wave
Distortion ≤ 1 %, 0.3 Hz to 200 kHz
THD <35 dB below fundamental in all ranges
(Specification applied from MAX. to 1/10 level)
Flatness <0.3 dB, 0.3 Hz to 300 kHz; < 0.5 dB, 300 kHz to 3 MHz;
Triangle Wave
Linear ≥ 98 %, 0.3 Hz to 100 kHz; ≥ 95 %, 100 kHz to 3 MHz
Square Wave
Symmetry ±2 %, 0.3 Hz to 100 kHz
Rise or Fall Time < 100 ns at maximum output (into 50 Ω load)
CMOS Output
Level 4 Vpp,± 1 Vpp to 14.5 Vpp ± 0.5 Vpp adjustable
Rise or Fall Time ≤ 120 ns
TTL Output
Level ≥ 3 Vpp
Fan Out 20 TTL load
Rise or Fall Time ≤ 25 ns
VCF
Input Voltage -10 V to + 10 V, ± 1 V (100:1)
Input Impedance 10 kΩ,± 10 %
GCV
Output Voltage 0 to 2 V DC, relative to frequency setting of range
Sweep Operation
Sweep/Manual Switch selector
Sweep/Rate 100:1 ratio maximum, adjustable
Sweep/Time 0.5 sec. to 30 sec. adjustable
Sweep/Mode Lin./Log. switch selector
Amplitude Modulation
Depth 0 to 100 %
Modulation Frequency 400 Hz (INT), DC to 1 MHz (EXT)
Carrier BW 100 Hz to 3 MHz (-3 dB)
EXT Sensitivity ≤ 10 Vpp for 100 % modulation
Frequency Modulation
Deviation 0 to ± 5 %
Modulation Frequency 400 Hz (INT), DC to 20 kHz (EXT)
EXT Sensitivity ≤ 10 Vpp for 10 % modulation
Frequency Counter
Internal/External Switch Selector
Range 0.3 Hz to 3 Mz Internal; 5 Hz to 150 MHz External
Accuracy Time base accuracy ±1 count
Time Base ±10 ppm (23ºC,± 3 ºC), after 30 min. warm-up)
Resolution 10 nHz (1 Hz range); 1 kHz (100 MHz range)
Input Impedance 1 MΩ /150 pF
Sensitivity ≤ 35 mVrms (5 Hz to 100 MHz)
≤ 45 mVrms (100 MHz to 150 Mhz)
Function Generator
Kommentare zu diesen Handbüchern