Wavetek 147 Spezifikationen PDF herunterladen (Seite 81)

100

101

Channel Plans: Setting Channel Plan Parameters

2. Use the up and down diamond keys to select the limit to be

edited.

3. Press the Enter soft key to begin, then use the numeric

keypad or the up and down diamond keys to make the entry.

When you have made the adjustment, press the Enter soft

key again to save the setting and update the display.

NOTE: You can use the Factory icon soft key at the upper

right of the screen to set all measurements in this screen to

the factory recommended default values.

Copy Remote Plan

This selection enables you to copy a channel plan from one meter to

another.

1. Confirm that each unit’s baud setting is the same. Although the default

is 9600, Acterna recommends a baud of 19.2k for copying plans. Then

connect a cable between the serial ports of two meters (this is a

special cable from Acterna).

2. From the CHANNEL PLAN menu, scroll to the Copy Remote Plan

item, and press the Enter soft key next to the Edit Box. A list of plans

located in the remote meter’s memory appears on the screen.

3. Select the plan that you want to copy and press the Copy soft key.

4. The selected plan is transferred from the remote meter and stored in

the meter that you are operating.

5. If there is a problem with the transfer, the screen notifies you.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 409 410

Kommentare zu diesen Handbüchern

Keine Kommentare

Wavetek 147 Spezifikationen Seite 81

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messen, Testen & Steuern Wavetek 147