Wavetek 39A Spezifikationen PDF herunterladen (Seite 116)

User Manual 301/302

• <AUTOmatic> will set the automatic advance mode

• <STEP> will set the stepped advance mode

•

<SINGle> will set the single advance mode

SSEQuence:ADVance?

Response

The 302 will return the AUTO, STEP, or SING depending on the present sequence advance mode setting.

SSEQuence:ADVance:SOURce EXTernal | INTernal

Purpose

This command will select the single-sequence advance source.

• <EXTernal> will set the external advance mode

• <INTernal> will set the internal advance mode

SSEQuence:ADVance:SOURce?

Response

The 302 will return the EXT, or INT depending on the present single-sequence advance source setting.

SSEQuence:DEFine <step_#>,<segment_#>,<#_repeat>

Purpose

This command will define single-sequence step.

• <step_#> numeric value will define the link number

• <segment_#> numeric value will select the segment for the above link

• <#_repeat> numeric value will define how many times the selected segment will loop

SSEQuence:DELete <ssequence_#>

Purpose

This command will delete a single sequence

SSEQuence:DELete:ALL

Purpose

This command will delete all sequences

SSEQuence:SELect <ssequence_#>

Purpose

This command will select the active sequence. You must use this command before you program this

specific sequence. Also, by selecting this sequence active, the SYNC output is made associated with this

sequence.

• <SSEQuence> numeric value will select the active sequence

SSEQuence:SELect?

Response

SCPI Command Reference

105

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 136 137

Keine Kommentare

Wavetek 39A Spezifikationen Seite 116