Wavetek 39A Spezifikationen PDF herunterladen (Seite 53)

User Manual 301/302

Selecting the SYNC

Position

The SYNC output can be programmed to output the SYNC signal at

any time referenced to the output waveform (expressed in waveform

points). This function is available in USER and SEQ modes only. Use

the following command to select the SYNC output position:

OUTPut:SYNC:POSition <value>

The SYNC position can be selected from point 0 to the last point of the

active waveform. SYNC position has to be programmed for each

segment. The default SYNC position is at the beginning of the

segment or waveform.

The query:

OUTPut:SYNC:POSition?

queries the output SYNC position and returns an integer value.

Figure 3.13 Controls for the SYNC output are on the Output tab

Generating

Arbitrary

Waveforms

The Model 301/302 cannot generate arbitrary waveforms without first

loading them into memory. A description of the arbitrary waveform

function and an explanation of how to load waveforms into memory

are given in the following paragraphs.

Configuring The Instrument

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 136 137

Keine Kommentare

Wavetek 39A Spezifikationen Seite 53